TexGraphics Flex Blockout
|Binnen- of buitengebruik||Binnen|
Lijmlaag en Backing
|Lijm type||warmte geactiveerd|
|Materiaal gebruikt als backing||PET|
|Maximale tempertatuurbestendigheid||40.0 °C|
|Duur van opslag||2 years, 20°C / 50% humidity|
Print the graphic with the right side facing up (do not reverse print).
Contour cut the image at reduced plotter speed.
After weeding, apply an application tape (we recommend clear IP PrintFlex Tape for heat transfer). Place the graphic on the fabric and transfer using a heat press. We recommend 135°C for 17-20 seconds (cotton). Always use a Teflon sheet or a layer of silicone paper to prevent the graphic from sticking to the upper plate of the heat press. Be sure to perform a test when using application tapes not recommended by Spandex.
Remove the application tape while the material is still warm as it will peel off better before it has cooled off completely.
To avoid a sublimationmigration we recommend that the garment is not preheated.
Washability up to 40°C (inside out) - do not tumble dry - and iron inside out.
Due to the numerous factors associated with the manufacturing and handling of the heat transfer film, the physical properties of the fabric as well as varying washing and cleaning conditions, product liability only extends to the unprinted material.