3M IJ180mC-LSE, Low Surface Energy
3M™ Series IJ180mC-LSE with microComply™ adhesive has non-visible air release channels for fast and easy, bubble-free graphic installations and provides excellent opacity with a grey adhesive.
The film consists of a pressure activated adhesive for easy sliding, tacking, snap-up and re-positioning.
IJ180mC-LSE conforms to flat surfaces, with and without rivets, simple curves, compound curves and corrugations and has been designed to adhere to hard-to-bond surfaces such as low surface energy plastics which are common on motorsports vehicles, such as motorcross bikes and snowmobiles. You will also see the product used on recreation vehicles or horse trailers.
Point of Sale
|Interior or Exterior use||
Adhesive & Liner
|Adhesive||Permanent, grey adhesive|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||20 N/25mm|
|Adhesive Type||Pressure Activated|
|Minimal Temperature Resistance||-60 °C|
|Maximal Temperature Resistance||107 °C|
Slightly curved surface
|Shelf Life||2 years|
|Storage & Transport conditions||4°C to 40°C|
|Minimum Application temperature||4 °C|
|Maximum Application temperature||38 °C|
|Durability (range)||10 years|
|Low Surface Energy Compatible (LSE)||Yes|