Fleet Engineer Grade
ORALITE® 5600E Fleet Engineer Grade has been designed for high quality commercial and fleet livery, allowing the production of lettering, markings and decorations in accordance with ECE 104. This material can be screen or digitally printed with solvent, UV and latex based inks and is suitable for conversion on computerised cutting systems.
ORALITE® 5600E complies with ECE Regulation No. 104 for material class E. This reflective material displays an approval (water mark) applied every 100 mm. The approval mark shows the material class (E), the ECE regulation number (104) and the approval number (002246).
Application possibilties include uneven substrates such as those with rivets and corrugations.
ORALITE® 5600E is available in 11 colours and comes with a high degree of flexibility combined with excellent corrosion and solvent resistance.
- Reflective film with watermark for approved ECE 104 graphics
- 110 - 140 micron cast PVC
- 11 colours
- Good adaptability to corrugations or rivets
- Durability: 7 years
- Adhesive: solvent polyacrylate, permanent, removable by heat
|Interior or Exterior use||Exterior|
Adhesive & Liner
|Adhesive||Solvent acrylic based, permanent|
|Adhesive Composition||Water-based acrylic|
|Adhesive Strength||17 N/25mm|
|Material used as liner||PE coated silicon paper|
|Minimal Temperature Resistance||-50 °C|
|Maximal Temperature Resistance||95 °C|
|Curve Format||Slightly curved surface|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20°C and 50% relative humidity|
|Minimum Application temperature||15 °C|
|Durability (range)||7 years|
|Surface Type||Flat surfaces|
IMPORTANT NOTICE: When using ORALITE® sheeting the relevant national specifications have to be complied with. ORAFOL recommends you obtain the current requirements from your local authority and ensure product conformance with such requirements. Please contact ORAFOL for further information.
Application/Processing: ORALITE® 5600 was especially developed for high-quality commercial and fleet livery. Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be completely cured. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. The self adhesive reflective material can only be used for dry application. For other applications the user is fully responsible for evaluating the suitability of the product, and for any risks associated with that use.
E5600E070Black - Gloss
EB5600E010White - Gloss
EB5600E050Blue - Gloss
EB5600E070Black - Gloss
EB5600E035Orange - Gloss
EB5600E020Yellow - Gloss
EB5600E030Red - Gloss
EB5600E060Green - Gloss
EB5600E053Light Blue - Gloss