ImagePerfect™ TransFlex™ Fashion 4200 - Camouflage
Camo Effect Textile Marking Film
ImagePerfect™ TransFlex™ 4200 Camouflage, is a highly opaque, heat transfer material with a fashionable design and unique surface finish.
This material can be cut with all current plotters using a 45° knifeblade. Reverse cut TransFlex™ 4200 through the hotmelt adhesive to the surface of the polyester transfer film.
TransFlex™ 4200 can be used for sport and leisurewear, we do not recommend using this material on water repellant surfaces such as Nylon. In this case we recommend the use of TransFlex™ 600
|Minimum Application temperature||150 °C|
|Maximum Application temperature||160 °C|
Adhesive & Liner
|Adhesive Type||Heat activated|
|Material used as liner||Polyester|
|TransFlex 4200||Suitable for Cotton, Cotton/Polyester, Polyester/Acrylic and Polyester||160°C||15 sec||Medium|
This material can be cut with all current plotters using a 45° knife. We recommend reducing the speed of the plotter and slightly increasing the pressure of the knife blade from standard viny-cutting settings. Reverse cut TransFlex™ throught the hotmelt adhesive to the surface of the polyester transfer film.
On Carbonium, Jeans, Snake and Marble, remove the polyester liner whilst the material is still warm, on all other TransFlex™ 4200 films, wait until the media has cooled down. After removal of the polyester liner we recommend pressing the material for a further 2 seconds. We can only guarantee a secure and long-lasting bond if the specified temperatures and pressing guidlines are followed.
Wash inside out up to 40°C, colour detergent recommended. Iron on reverse. This material is suitable for dry cleaning.