ImagePerfect™ 2420 ETU Wallpaper
Ready Pasted Wallpaper
ImagePerfect™ 2420 ETU Wallpaper is a washable, non-woven paper with a high level of opacity and a smooth surface for wall decoration. The product is already pre-coated with paste, simply dip the printed product into a tray of water and then apply directly to the substrate.
This product has been specially created for digital printing on large-format inkjet printers and is suitable for printing with eco solvent and solvent inks as well as UV-cured and latex inks.
ImagePerfect™ 2420 can be used to personalise home interiors, retail spaces, show rooms, trade shows, hotels, restaurants and many more environments. It promotes high levels of print quality with remarkable text definition and a large colour gamut to ensure colourful images with vibrant area infills.
It incorporates high levels of dimensional stability and generates no shrinkage. As such, individual panels do not need to be overlapped; they can simply be applied side-by-side on the substrate with no risk of subsequent separation.
While the paste is wet, the IP 2420 remains repositionable and so can be readily moved on the substrate to slide the wallpaper panels into place. In comparison to using a traditional wallpaper, with the need to apply a conventional paste, it is expected that the use of IP 2420 will reduce the application time by more than 50%.
The printed graphics are very scrub-resistant and the material can be cleaned with warm water, soap and a soft sponge. IP 2420 is permeable to moisture.
This product is free of PVC, it meets the requirements of the FSC® (Forest Stewardship Council) and it is ISO14001 certified and, as such, it can be validated as being sustainable, environmentally-friendly and ecologically produced, with the production of the wood that is used in the production of the paper being a socially and environmentally-responsible process.
|Interior or Exterior use||Interior|
Adhesive & Liner
|Adhesive Composition||Water-based acrylic|
|Adhesive Type||ETU technology|
|Shelf Life||2 years, 20°C / 50% humidity|
It is important to use the matched Spandex print profile for this product as vertically-applied graphics may otherwise delaminate from the substrate as a result of increased surface tension (caused by ink oversaturation).
It is strongly recommended for the printed media to lay flat during the drying process.
Please ensure that the printed IP 2420 is completely dry before application.
Please ensure that the surface is perfectly clean, completely dry and primed before application of the IP 2420.