ImagePerfect™ 2918 Eco-Tex Matt
TexGraphics, Eco-Tex Flex matt
Learn more about ImagePerfect™ 2918 Eco-Tex Matt
ImagePerfect™ IP 2918 Eco-Tex Flex is an opaque, white matt, printable Flex material which is suitable for light and dark textiles. The product has been specifically created for digital printing on large-format inkjets and is suitable for printing with eco solvent, solvent and latex inks.
This material is free of plasticizer and heavy metals (in accordance with Oeko-Tex Standard 100 Class 1).
IP 2918 offers a high print resolution with a matt finish. Because of the special top coating, this material offers an excellent washing resistance at temperatures up to 60oC.
Due to the PET backing, contour cutting of small shapes is possible.
|Interior or Exterior use||Interior|
Adhesive & Liner
|Adhesive||Heat activated, clear adhesive|
|Adhesive Type||Heat activated|
|Material used as liner||PET Liner|
|Shelf Life||2 years, 20°C / 50% humidity|
|Curve Format||Flexible substrates|
Print the graphic with the right side facing up (do not reverse print).
Contour cut the image at reduced plotter speed.
After weeding, apply an application tape (we recommend clear IP PrintFlex Tape for heat transfer). Place the graphic on the fabric and transfer using a heat press. We recommend 165°C for 17-20 seconds (cotton).
Always use a Teflon sheet or a layer of silicone paper to prevent the graphic from sticking to the upper plate of the heat press. Be sure to perform a test when using application tapes not recommended by Spandex.
Remove the application tape while the material is still warm as it will peel off better before it has cooled off completely.
Washability up to 60°C (inside out) - do not tumble dry - and iron inside out.
Due to the numerous factors associated with the manufacturing and handling of the heat transfer film, the physical properties of the fabric as well as varying washing and cleaning conditions, product liability only extends to the unprinted material.