ImagePerfect™ 2909 represents a new generation of synthetic materials for a wide range of applications.
Featuring a B1 / M1 fire rating and excellent lay flat properties, this material is the ideal choice for roll-up and pop-up displays, as well as point of sale.
IP 2909 has a matt look and is highly resistant to water and abrasion.
This single-sided, semi-rigid material offers excellent printability and has a good opacity.
IP 2909 works very well on high speed printers.
|Interior or Exterior use||Interior|
|Minimal Temperature Resistance||-10.0 °C|
|Maximal Temperature Resistance||55.0 °C|
|Shelf Life||2 years (20°C / 50% relative humidity)|
This semi-rigid material can be score cut on almost any plotter.
A 45° tangential blade should be used. A 45° swivel blade can be substituted for simple shapes. Plotter speed should be slowed to 60%.
Optimal weeding results will be achieved if shapes with sharp corners are assigned a radius of at least 1/10” [2.54mm] (use the “Fillet Corner” feature). Small shapes may be difficult to weed; the user should determine sizes appropriate to the design of the graphic.
The ideal score cut will penetrate halfway through the material. To remove your finished pieces, find a straight cut line and fold the material backwards. Pinch the cut line with your fingers and the material will separate. Slowly remove the finished piece one edge at a time. The user should perform a test cut to determine if the tool force setting needs to be adjusted for their application.