ORAGUARD 285F is useful for the protection of sensitive surfaces against mechanical forces in interior and exterior applications and has been specially designed for the protection of vehicle body parts such as front and rear bumpers, side skirts etc. against stone chipping.
Recommended for bonding to even and slightly curved surfaces, ORAGUARD 285F is a polyurethane film with outstanding UV-resistance and excellent tear strength.
It also features a highly transparent glossy finished surface and a polyester film liner.
- Polyurethane film (50 micron)
- Polyester film liner
- Highly transparent
- For protection of sensitive surfaces against mechanical forces, especially designed as stone chipping protection film for vehicle body parts
- Service life by specialist application: max. 5 years
- Solvent polyacrylate, permanent adhesive
|Interior or Exterior use||Exterior|
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||100.0 °C|
|Minimum Application temperature||10.0 °C|
Slightly curved surface
Adhesive & Liner
|Adhesive||Permanent, solvent adhesive|
|Adhesive Composition||Solvent-based acrylic|
|Material used as liner||Polyester film, siliconised on one side, 36 µm|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20°C and 50% relative humidity|
|Durability (range)||5 years|
Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any other contamination that could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. Furthermore, the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.