3M® Envision® Print Wrap Film SV480Cv3
Non-PVC Wrapping Film
3M® Envision® Print Wrap Film SV480Cv3 is versatile enough to wrap everything from vehicles to trailers to boats to textured buildings.
It is a 50 micron white non PVC film with a pressure activated, repositionable, removable adhesive. This film is an environmentally friendly option for a greener solution.
Ideal for long term graphic applications on smooth services, it is also suitable for short term wall graphics on moderately textured surfaces. 3M® 480Cv3 is flexible, highly conformable over compound curves, corrugations, deep channels and rivets, and requires less heat during application than vinyl films.
This new film goes beyond just being non-PVC, with a breakthrough boost in performance in addition to the innovations of 3M films IJ180Cv3 and IJ380Cv3.
Use LX480Cv3 with Latex Inkjet Inks
Use SV480Cv3 with Solvent Inkjet Inks
Use LX480Cv3 or SV480Cv3 with UV Inkjet or Screen Print Inks
|Interior or Exterior use||
|Minimal Temperature Resistance||-60.0 °C|
|Maximal Temperature Resistance||107.0 °C|
|Minimum Application temperature||10.0 °C|
|Product Type||Non-PVC polymer|
Adhesive & Liner
|Adhesive||Repositionable, removable with air egress|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||20.0 N/25mm|
|Adhesive Type||Pressure Activated|
|Adhesive Technology||3M Comply™ v3|
|Material used as liner||Polyethelene coated paper|
|Shelf Life||Total shelf life: 3 years from the date of manufacture on the original box. If you do process the film, do so within 2 years and apply within 1 year. If you do not process the film, apply it within 3 years.|
|Storage & Transport conditions||See additional information|
|Durability (range)||Up to 12 years|
Please refer to attached product bulletin for detailed instructions for a range of applications and for 3M warranty details.
Application temperature and life expectancy varies with application type.
• 40° to 100°F (4° to 38°C)
• Out of sunlight
• Clean dry area
• Original container
• Bring the film to print room temperature before using