ImagePerfect™ 2830-106 StoneGuard
Stoneguard Polymeric Vinyl Laminate 320 Microns
ImagePerfect™ 2830-106 is a polymeric, transparent gloss laminate that has been specifically engineered to afford digital prints with high levels of protection from forceful impact, typically as a stone chip/stone guard protector in the automotive industry.
IP 2830-106 is an extra thick, flexible overlaminate product that is ideally suited as a protective film for printed graphics in application to vehicles, helmets, hard hats, motocross bikes, snowmobiles and for protecting other "extreme sports" equipment, including recreational vehicles.
For automotive application, IP 2830-106 has been qualified for overlacquer application in stone chip and corrosion-sensitive areas. The product affords high levels of adhesion at high temperatures.
Please note that the product is not suitable for application to apolar, low-energy substrates (including polypropylene and polyethylene) and, because of the overall thickness of the print media/laminate construction, applications to compound curves and/or corrugations and/or applications over rivets are not recommended.
A version of this product is also available in a thickness of 240mym (IP 2830-105).
|Interior or Exterior use||
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||110.0 °C|
Slightly curved surface
Smooth and untextured surface
|Product Type||Calendered Polymeric|
Adhesive & Liner
|Adhesive||Solvent acrylic based, permanent|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||11.0 N/25mm|
|Material used as liner||PE-coated silicone paper, 140g/m²|
|Fire Rating||Self-extinguishing when adhered to steel|
|Shelf Life||2 years (20°C / 55% relative humidity)|
|Durability (range)||Up to 7 years|