Arlon DPF 4600LX Vinyl Film
With X-Scape Technology
Arlon DPF 4600LX is constructed of an 80 micron, white gloss, high performance film with a repositionable tinted adhesive system.
The repositionable light gray adhesive allows for easy installation while ensuring enough opacity for covering up existing graphics or dark substrates.
The new LX low profile X-Scape Technology provides installers the benefit of a bubble free installation combined with a smooth printed surface that doesn’t show the pattern through the print.
DPF 4600LX works great for vehicle graphics and wraps.
|Interior or Exterior use||
|Minimal Temperature Resistance||-29.0 °C|
|Maximal Temperature Resistance||65.0 °C|
|Minimum Application temperature||10.0 °C|
|Maximum Application temperature||32.0 °C|
Slightly curved surface
|Product Type||Calendered Polymeric|
Adhesive & Liner
|Adhesive||Tinted, repositional, removable with air egress|
|Adhesive Composition||Solvent-based acrylic|
|Material used as liner||polycoated layflat|
|Shelf Life||1 year from factory shipment|
|Storage & Transport conditions||Free from excessive moisture, temperature, direct sunlight|
Recommended laminate: Series 3220, Series 3210 or Series 3420.
NOTE: Recommended post-heat surface temperature of vinyl installed: 95°C to 105°C. Post heat must be applied gradually and approximately 125mm from the film in order to avoid the matte from turning glossy.
The reccomended post heat temperature applies to the media & matte overlaminate wrap.
DPF 4600LX is designed to be used for vehicle graphics and wraps with flat or simple curves. When wrapping curves and channels with DPF 46000LX it is recommended the product be draped and not stretched into areas with channels.
Please refer to attached data sheet for more information.