ORAJET® 3164HT is a soft, 100 micron, white PVC with a gloss finish and high tack adhesive suitable for hard to stick surfaces.
Perfect for brilliant and colourful graphics requiring short to medium term outdoor durability, this product exhibits excellent initial peel adhesion even onto apolar surfaces.
This product is suitable for inkjet printing with solvent, UV or latex inks.
- 100 micron soft PVC film
- For short- and medium-term outdoor applications
- High tack, polyacrylate, clear permanent adhesive
- 4 year life
Additional finishes and adhesive options are also available.
Point of Sale
|Interior or Exterior use||
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||80.0 °C|
|Minimum Application temperature||10.0 °C|
|Curve Format||Flat surfaces|
|Product Type||Calendered Monomeric|
Adhesive & Liner
|Adhesive||Permanent, clear, high tack adhesive|
|Adhesive Composition||Water-based acrylic|
|Adhesive Type||High Tack|
|Material used as liner||Silicone coated paper on one side, 135 g/m²|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20° C and 50% relative humidity|
|Durability (range)||4 years|
Note: After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate. Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of the selected lacquers and paints should be tested by the user, prior to the application of the material. Furthermore the application information published by ORAFOL must be considered.