ORAJET® 3981RA Premium Eco Digital Print – is the environmentally friendly alternative when it comes to car wrapping.
Being 100% free from PVC and plasticisers, this new film is the latest extension to ORAFOL’s already large range of “green” graphics films, This new wrapping film comes with outstanding application features making the installation process even easier. The material can be stretched more than conventional wrapping films, and will not lift.
Covering compound curves is easier than ever, and with the classic ORAFOL® RapidAir® construction, the risk of bubbles forming under the material during the process is avoided.
ORAJET® 3981RA has been specially developed for inkjet printing, it's glossy surface allows for exceptionally sharp, brilliant print reproduction.
Green and stretchable – a new industry favorite is born.
ORAJET® 3981RA Premium Eco Digital Print is the environmentally friendly alternative when it comes to car wrapping.
- Premium PVC-free and plasticiser-free high performance polymer film
- Glossy surface
- RapidAir® technology for easy and hassle free application
- For long term applications as full wraps onto vehicles
- Suitable for inkjet printing with solvent based inks as well as latex and UV cured inks.
- Recommended Laminating Film: ORAGUARD® 289F – also PVC-free and plasticiser-free
|Interior or Exterior use||
|Minimal Temperature Resistance||-50.0 °C|
|Maximal Temperature Resistance||100.0 °C|
|Minimum Application temperature||8.0 °C|
|Product Type||Non-PVC polymer|
Material Ink Compatibility
Adhesive & Liner
|Adhesive||Permanent, solvent, repositionable adhesive with air egress|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||16.0 N/25mm|
|Material used as liner||Double sided PE coated RapidAir® paper, one side siliconised, 145 g/m²|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20° C and 50% relative humidity|
|Durability (range)||10 years|
After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate. Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure.
The compatibility of the selected lacquers and paints should be tested by the user, prior to the application of the material.
Furthermore the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.