ORAJET® 3591 is a premium cast white gloss PVC designed for long-term outdoor displays with the highest degree of brilliancy and durability e.g. complete car wrapping.
The RapidAir® technology enables easy and quick bubble-free application, especially of large-sized graphics or decals. Entrapped air can be easily removed by simply smoothing it out under the film.
For more curved surfaces, such as corrugations or rivets, these films should generally be handled like calendered films.
- 55 micron cast PVC
- White, gloss finish
- Nearly blister-free application due to microchannels - RapidAir®
- 10 year life
- Adhesive: Solvent polyacrylate, repositionable, permanent, in grey or clear
- DIN 4102-1 B1
|Interior or Exterior use||
|Minimal Temperature Resistance||-50.0 °C|
|Maximal Temperature Resistance||100.0 °C|
|Minimum Application temperature||8.0 °C|
Adhesive & Liner
|Adhesive||Repositionable grey, solvent based with air egress|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||18.0 N/25mm|
|Adhesive Technology||Orafol RapidAir|
|Material used as liner||Silicone coated RapidAir® PE paper on both sides|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20° C and 50% relative humidity|
|Durability (range)||10 years|
Note: After printing, the ink must be allowed to thoroughly dry, in order to avoid any issues when later combined with the laminate. Surfaces to which the material will be applied must be thoroughly cleaned and free from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure. The compatibility of the selected lacquers and paints should be tested by the user, prior to the application of the material. Furthermore the application information published by ORAFOL must be considered. The batch traceability according to ISO 9001 is possible on the basis of the roll number.