ImagePerfect™ 2507 White Cast Film
Cast Vinyl, Vehicle Wrap Film, White Gloss, Repositionable, Permanent, B1 Fire Rating
ImagePerfect™ 2507 is a premium cast white gloss vinyl intended for indoor and long-term outdoor applications, such as vehicle graphics, complete vehicle wraps and many other 3D applications.
The inculsion of non-migrating plasticizers and UV stabilizers, ensure a long-term outdoor durability. The product promotes high levels of print quality with remarkable text definition and a large colour gamut to ensure colouful images with vibrant area in-fills.
It is equipped with a backing paper that offers excellent lay flat properties, and due to its grey adhesive, offers excellent opacity.
Recommended laminates: IP 2800-100 or IP 2800-200 (3D applications), IP 2800-101, IP 2830-101, IP 2830-102.
Please see additional info for further details.
|Interior or Exterior use||
|Minimal Temperature Resistance||-30.0 °C|
|Maximal Temperature Resistance||90.0 °C|
Material Ink Compatibility
Adhesive & Liner
|Adhesive||Solvent acrylic based, grey, repositionable and permanent|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||18.0 N/25mm|
|Material used as liner||PE coated silicone paper, 140g/m²|
|Shelf Life||2 years (20°C / 50% relative humidity)|
|Durability (range)||Up to 10 years|
Please make sure the printed IP 2507 is completely dry before laminating and applying. before the IP 2507 is applied, he surface should be completely cleaned.
The use of IP Surface Cleaner (MIP1000) and the lint-free, IP Surface Cleaning Cloths (MMS8373) is a good match component cleaning solution to ensure that the surface is dry and free of dust and grease. The use of acetone as an additional surface cleaner is also recommended, particularly in the case of low-energy surfaces, such as coated car glass.
In order to achieve the best results, the product should be dry applied.
When the material has been applied into convex or concave contours and is thereby subject to deformation, it is then imperative that post-heating is carried out.
As such, heat up the vinyl evenly over the contours at a temperature of 100°C.
For best results, use an infrared thermometer for accuracy (MIPIR360) or the heat gun and temperature scanner kit (MSTHG2120ESET).
JEIP250725White - Gloss
APIP250750White - Gloss
JBIP250750White - Gloss
JEIP250750White - Gloss
JUIP250710White - Gloss
JUIP250725White - Gloss
JUIP250750White - Gloss
JYIP250725White - Gloss
JYIP250750White - Gloss
ImagePerfect™ 2800-100 Gloss 3D Over-Laminate