Short Term Gloss Overlaminate
Oraguard® 200 can be used for the protection of digitally printed large format images in indoor and short term, outdoor applications.
This soft gloss PVC offers a high level of UV protection with a 2 year service life.
Oraguard® 200 is also suitable for use in wet application and heat transfer processing for electrostatic prints.
- 70 micron gloss PVC
- For the protection of digitally or electrostatically printed large-format displays
- For short-term outdoor applications up to 2 years
- Adhesive: polyacrylate, permanent, transparent
|Interior or Exterior use||
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||80.0 °C|
|Minimum Application temperature||10.0 °C|
|Curve Format||Flat surfaces|
|Product Type||Calendered Monomeric|
Adhesive & Liner
|Adhesive||Acrylic based, permanent|
|Adhesive Composition||Water-based acrylic|
|Adhesive Strength||10.0 N/25mm|
|Material used as liner||silicone paper, 90g/m²|
|Surface Type||Flat surfaces|
|Shelf Life||2 years|
|Storage & Transport conditions||In original packaging, at 20°C and 50% relative humidity|
|Durability (range)||2 years|
Note : Due to the diversity of prints and printing techniques, the user should test the suitability of ORAGUARD® laminating films for the specific print purpose, prior to use. Furthermore the application information published by ORAFOL must be followed.