ImagePerfect™ 2830-104 UV-Print, Clear Gloss Overlaminate
UV Print Polymeric Laminate
ImagePerfect™ 2830-104 UV-print is a polymeric transparent gloss laminate featuring a permanent acrylic adhesive.
This new product has been specifically engineered to allow for the lamination of UV prints that are generally difficult to laminate because of the fact that the low-energy nature of the printed output makes it difficult to establish any sort of adhesive bond with the surface.
This laminate option even works effectively on large areas of dark, block UV print which generally have lower peel values than areas that are covered with light coloured print and are, therefore, more problematic in terms of establishing an adhesive bond with the product.
IP 2830-104 can be used as a laminate option for cast, polymeric and monomeric products.
Please note that this product should not be used in conjunction with high-pressure washing systems as it would increase the risk of the product losing its adhesive bond with the substrate.
|Interior or Exterior use||
|Minimal Temperature Resistance||-30.0 °C|
|Maximal Temperature Resistance||90.0 °C|
|Product Type||Calendered Polymeric|
Adhesive & Liner
|Adhesive||Rubber based, acrylic permanent|
|Adhesive Composition||Water-based acrylic|
|Adhesive Strength||20.0 N/25mm|
|Adhesive Type||Low energetic|
|Material used as liner||PE-coated silicone paper, 140g/m²|
|Shelf Life||2 years (20°C / 50% relative humidity)|
|Durability (range)||Up to 3 years|