ImagePerfect™ 2308 Polyester Flag
100% Trevira Fabric, Premium, Matt, 110g/m
ImagePerfectTM 2308 Flag with liner, is a special textile flag material that has been specifically designed to allow for high levels of printability with eco, light solvent, or true solvent inks and UV-cured inks.
This flag material can be used for backgrounds or horizons at trade shows, show rooms, theatres and wherever a textile banner with a see-through or double-sided effect is needed. IP 2308 can also be used for short-term outdoor applications.
IP 2308 features a liner to prevent soiling of the machine by the inks. The printed image will be visible on the reverse side of the fabric after printing, on removal of the liner. Remove the release paper immediately after printing. This is best done with the print side facing down. This fabric must always be hemmed and can be screen printed with PVC inks. Print side is on the outside of the roll.
Important: For applications where flame retardancy is required, we recommend using IP 2301. However, note that IP 2301 offers less color intensity than IP 2308.
|Tensile strength||350/650 N/5cm|
|Interior or Exterior use||
|Minimal Temperature Resistance||-30 °C|
|Maximal Temperature Resistance||80 °C|
Material Ink Compatibility
|Shelf Life||1 year (20°C / 50% relative humidity)|
|Durability (range)||Up to 3 months|
Please note that this product can not be printed with latex inks.
During printing, the heater temperature should not exceed 35°C.