ImagePerfect™ 2558 is a white, semi-gloss vinyl with a permanent, agressive, high-tack adhesive for indoor and outdoor applications on LSE (low surface energy) substrates and other “hard to stick to” surfaces.
This product has been specially created for digital printing on large-format inkjet printers and is suitable for printing with eco solvent and solvent inks as well as UV-cured and latex inks.
IP 2558 also performs well in cold temperature environments. and is recommended for flat and slightly textured surfaces.
It promotes high levels of print quality with remarkable text definition and a large colour gamut to ensure colourful images with vibrant area infills. The PE-coated silicone backing paper offers excellent lay flat properties.
Laminate: IP 2810-101, IP 2810-200, etc..
Point of Sale
|Interior or Exterior use||
|Minimal Temperature Resistance||-30.0 °C|
|Maximal Temperature Resistance||120.0 °C|
|Minimum Application temperature||5.0 °C|
|Product Type||Calendered Polymeric|
Adhesive & Liner
|Adhesive||Permanent solvent adhesive|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||22.0 N/25mm|
|Adhesive Type||Low energetic|
|Material used as liner||PE-coated silicone paper, 140g/m²|
|Shelf Life||2 years, 20°C / 50% humidity|
|Durability (range)||7 years|
Please make sure the printed IP 2558 is completely dry before laminating and/or application. If the printed IP 2558 is not completely dry before laminating, it can negatively affect the adhesive performance. If the printed IP 2558 is not completely dry before application, it can show very high shrinkage and edge curling.
Before the IP 2558 is applied, the surface should be completely cleaned. The use of IP Surface Cleaner (MIP1000) and the lint-free, IP Surface Cleaning Cloths (MMS8373) is a good match-component cleaning solution to ensure that the surface is dry and free of dust and grease.
On “hard to stick to” surfaces, we would recommend a test to confirm that the product will bond before full application takes place.