Avery Dennison® MPI™ 8626 Wall Film Hi-tack
Hi-Tack Wall Covering for Apolar Surfaces
Avery Dennison® MPI™ 8626 Wall Film Hi-tack is a white calendered film designed for wall graphic applications on slightly structured and apolar substrates.
MPI™ 8626 Wall Film is a multi-purpose vinyl, developed for use on various super wide format printers using Latex, solvent, Eco/mild solvent and UV curable inks.
- Internal wall murals and wall decorations, including applications with slightly structured surfaces
- Indoor promotional advertizing
- Retail wall graphics
- Exhibition wall graphics
- Additional body of film provides optimal opacity and enables ease of application
- Excellent printability and handling on selected printers
- Easy cutting and application on a wide variety of substrates
- Special Hi-tack adhesives enables suitability for applications with slightly structured surfaces and apolar substrates, including interior walls
|Interior or Exterior use||Interior|
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||82.0 °C|
|Toxicity||Non hazardous product|
|Minimum Application temperature||10.0 °C|
|Curve Format||Flat surfaces|
Adhesive & Liner
|Adhesive||Permanent acrylic adhesive for slightly structured and apolar surfaces|
|Adhesive Type||Low energetic|
|Material used as liner||Clay coated kraft paper, 125 g/m2|
|Fire Rating||Self Extinguishing|
|Shelf Life||2 years|
|Storage & Transport conditions||Stored at 22° C/50-55 % RH|
Note: As the material has a high caliper, it is important to validate before printing, whether the printer can handle the rolls. To achieve the best possible print quality, please make sure the correct ICC Profile and printer settings are used.
Materials have to be properly dried before further processing, for example laminating, varnishing or application. The residual solvents could change the products’ specific features. For good print and converting result we recommend to let the rolls acclimatize in the print/lamination room at least 24 before printing or converting. Too much temperature or humidity deviation between material and room climate can cause layflatness and/or printability issues. Generally, constant material storage conditions of ideally 20°C (+/-2°C) /50% rh (+/- 5%), without too big climate deviations, will support a more robust and stable printing/converting process.
Durability: Indoor only 4 years