3M™ Scotchcal™ Graphic Film for Textured Surfaces IJ8624
Textured Wall Film
3M™ Scotchcal™ Graphic Film for Textured Surfaces IJ8624 is designed for either solvent-based piezo inkjet printing or electrostatic printing.
When heated these films conform to textured surfaces on both flat and curved substrates, including concrete block, brick, industrial stucco and tile similar to those surfaces commonly found in sports arenas, stadiums, restaurants, retail and other public venues.
|Interior or Exterior use||
|Minimal Temperature Resistance||50.0 °C|
|Maximal Temperature Resistance||105.0 °C|
|Minimum Application temperature||4.0 °C|
|Maximum Application temperature||38.0 °C|
Adhesive & Liner
|Adhesive||Acrylic based, grey, removable|
|Adhesive Composition||Solvent-based acrylic|
|Material used as liner||double-sided Polyethylene coated paper|
|Shelf Life||Use within two years from the date of manufacture on the sealed original box. Use within one year after opening the box.|
|Storage & Transport conditions||+4°C to +40°C, out of sunlight, original container in clean and dry area.|
|Durability (range)||6 months (outdoor) - 5 years (indoor)|