ImagePerfect™ 2555 StreetApp is a white, textured, scuff-resistant print media with a non-slip surface that has been specially engineered for the application of graphics to asphalt, tarmac, pavements, concrete, walls, etc. It has been created for digital printing on large-format inkjets and is suitable for printing with eco solvent and solvent inks, as well as UV-cured and latex inks.
It allows for excellent print quality with a large colour gamut that ensures colourful images with vibrant area in-fills. It offers a high level of scratch resistance and an inherent non-slip surface without needing additional lamination and is equipped with a semi-permanent adhesive system that (depending on the substrate) can be removed cleanly.
In conjunction with its bitumen-resistant adhesive system, it is an ideal product for promotional graphics in sports arenas, race tracks, car parks and on pavements.
Additionally, because of it's adhesive technology it is also suitable for application to carpet, wooden flooring, walls etc. It's emboss texture also makes it an interesting wallpaper product. The multi-layered construction incorporates a fabric layer which provides the product with flexibility and strength, increasing its resistance to cracking.
|Interior or Exterior use||
Adhesive & Liner
|Adhesive||Permanent, solvent acrylic|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Type||High Tack|
|Shelf Life||12 months, 20°C / 50% humidity|
|Durability (range)||Up to 1 year|
In order to avoid potential lifting of the product, we would recommend that corners are rounded rather than cut to a sharp 90° angle.
Surface preparation: In order to achieve process-secure application, it is essential that the substrate is totally dry and completely free of dust, dirt and debris before the product is installed. As such, we would recommend that the substrate is brushed and vacuumed before the IP 2555 is applied and, if the substrate is wet, we would recommend that it should be dried via gas/electric heating.
For application on structured surfaces, we recommend the use of the 45mm Soft Application Roller (MMSROLLEPRO), as it will press the material into the structure of the surface.