3M™ Controltac™ Graphic Film 162-10 / IJ162-10 is a polymeric calendered film that can be used, in combination with the designated protecting overlaminate, to produce outstanding resistant graphics for floors.
3M™ Controltac™ minimizes the initial contact area of the adhesive and allows the applicator to reposition the film during application. This allows easier installation of large format graphics in a wide temperature range.
|Interior or Exterior use||Interior|
|Minimal Temperature Resistance||-34.0 °C|
|Maximal Temperature Resistance||93.0 °C|
|Minimum Application temperature||10.0 °C|
|Maximum Application temperature||38.0 °C|
|Product Type||Calendered Polymeric|
Adhesive & Liner
|Adhesive||Removable, repositionable, grey, solvent adhesive|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Type||Pressure Activated|
|Adhesive Technology||3M Controltac™|
|Material used as liner||Double-sided Polyethylene coated paper|
|Shelf Life||Use within two years from the date of manufacture on the sealed original box. Use within one year after opening the box.|
|Storage & Transport conditions||+4°C to +40°C, out of sunlight, original container in clean and dry area.|
|Durability (range)||3 years|
Substrate type : ceramic, finished wood, marble, sealed concrete, terrazzo, waxed vinyl
Graphic removal : Removable without heat and/or chemicals from supported substrates.
No liability is given for ease or speed of removal of any graphic.
Pay attention to adequate air and substrate temperature
3M,3645 Floorlaminat 122cm x 50m