3M™ DI-NOC™ Architectural Finishes, Abrasion Resistant
Decorative Architectural Film
3M™ DI-NOC™ Architectural Finishes are used by designers and architects around the world as decorative material.
These finishes give you almost unlimited creative freedom, whilst the ability to convert in situ affords cost effective refurbishment and repair.
The "Abrasion Resistant" family contains patterns with a superior abrasive resistance.
Suitable for refurbishing or upgrading high traffic areas, counter and table tops.
Designs for indoor usage only.
|Minimum Application temperature||12.0 °C|
|Maximum Application temperature||38.0 °C|
Adhesive & Liner
|Adhesive||Clear, permanent adhesive with 3M Comply™|
|Adhesive Strength||20.0 N/25mm|
|Adhesive Technology||3M Comply™|
|Material used as liner||PE coated Kraft paper|
|Shelf Life||2 years|
|Storage & Transport conditions||On a 3" core at 35°C or less|
|Durability (range)||12 years, internal use only|
Suitable for flat and 3D surfaces.
Dry application only.
EAR112025 has the following pattern repeat:
Surface pattern grain: straight grain