ImagePerfect™ 2324 Wall Textile
Self Adhesive Polyester Textile
ImagePerfect™ 2324 Wall Textile is a self-adhesive, opaque and water-resistant fabric with a permanent adhesive, for applications such as wallpapers, wall art and wall graphics, all with outstanding print quality. The specially engineered adhesive system will ensure a full bond to painted and/or plaster surfaces.
This product offers a high print quality with remarkable text definition and a large colour gamut to ensure colourful images and vibrant area in-fills.
It can be used for a wide variety of indoor and short-term outdoor applications such as point-of-sale promotions, textile billboards and posters, backgrounds in locations such as retail outlets, trade events, offices, theatres, showrooms, exhibition halls and other textile applications, such as those in lifestyle and event business locations
It can be kiss cut or die cut, either manually or with a CAD/ CAM plotter.
This product has been specially created for digital printing on large-format inkjet and is suitable for printing with eco solvent and solvent inks, as well as UV-cured and latex inks.
IP 2324 is PVC-free and chlorine-free and, as such, it can be regarded as being environmentally-friendly.
|Interior or Exterior use||Interior|
Adhesive & Liner
|Adhesive||Permanent acrylic adhesive|
|Adhesive Composition||Water-based acrylic|
|Material used as liner||PE-coated silicone paper, 140g/m²|
|Shelf Life||1 year, 20°C / 50% humidity|
Attention: It is important to use the matched Spandex print profile for this product as vertically applied graphics may otherwise delaminate from the substrate as a result of increased surface tension (caused by ink oversaturation).
Please ensure the printed IP 2324 is completely dry before application. It is strongly recommended for the printed media to lay flat during the drying process.
IP 2324 is not recommended for brick, non-painted cement surfaces or heavily-painted speckled walls. For application on structured surfaces, we recommend the use of the 45mm Soft Application Roller (MMSROLLEPRO), as it will press the material into the structure of the wall. Before the product is applied, the surface should be completely clean.
The use of IP Surface Cleaner (MIP1000) and the lint-free, IP Surface Cleaning Cloths (MMS8373) is a good match component cleaning solution to ensure that the surface is dry and free of dust and grease. Recommended Application Tape for kiss cut and die cut graphics: ImagePerfect™ AT-500 or ImagePerfect™ AT-505.