Arlon DPF 4600LX Vinyl Film | Intermediate Vehicle-wrap print films | Printable Wrap Films | Vehicle Wrapping | Materials | Products Catalogue | Spandex - Leading Brands for Graphic Solutions
text.skipToContent

Arlon DPF 4600LX Vinyl Film

With X-Scape Technology

Arlon DPF 4600LX is constructed of an 80 micron, white gloss, high performance film with a repositionable tinted adhesive system.

The repositionable light gray adhesive allows for easy installation while ensuring enough opacity for covering up existing graphics or dark substrates.

The new LX low profile X-Scape Technology provides installers the benefit of a bubble free installation combined with a smooth printed surface that doesn’t show the pattern through the print.

DPF 4600LX works great for vehicle graphics and wraps.

Specifications

Application Type

Application Car wrap
Decoration
Opaque Signs
Signmaking
Vehicle Marking
Interior or Exterior use Exterior
Interior

Adhesive & Liner

Adhesive Tinted, repositional, removable with air egress
Adhesive Composition Solvent-based acrylic
Adhesive colour Grey
Adhesive Type Pressure-sensitive
Removability Removable
Material used as liner polycoated layflat
Liner Colour White

Temperature Resistance

Minimal Temperature Resistance -29 °C
Maximal Temperature Resistance 65 °C

Application Specifications

Curve Format Slightly curved surface
Flat surfaces

Dimensions

Thickness 80 µ

Product Storage

Shelf Life 1 year from factory shipment
Storage & Transport conditions Free from excessive moisture, temperature, direct sunlight

Application Temperature

Minimum Application temperature 10 °C
Maximum Application temperature 32 °C

Durability

Durability (range) 5

Product Type

Product Type Calendered Polymeric

Additional info

Recommended laminate: Series 3220, Series 3210 or Series 3420.

NOTE: Recommended post-heat surface temperature of vinyl installed: 95°C to 105°C.  Post heat must be applied gradually and approximately 125mm from the film in order to avoid the matte from turning glossy.

The reccomended post heat temperature applies to the media & matte overlaminate wrap.

DPF 4600LX is designed to be used for vehicle graphics and wraps with flat or simple curves. When wrapping curves and channels with DPF 46000LX it is recommended the product be draped and not stretched into areas with channels.

Please refer to attached data sheet for more information. 

Filter these variations

Arlon DPF 4600LX Vinyl Film is available in the following variations (2)

 

Article

Width

 

JUDPF4600LX45

  White - Gloss

ARL DPF4600LX White Gloss 1.37m X 45.72m

  • Durability 5.0 year(s)
  • Length 45.72 metre
  • Product number JUDPF4600LX45
  • Roll Length 45.72 metre
  • Surface Finish Gloss
  • Transparency Opaque
  • Width 137.2 cm
 

Add a note to your order line

NB – These notes are stored for your reference only –
these will not be seen by Spandex staff.

132 characters remaining

Confirm

 

£

0.00

Please select your slitting option.

Please select your slitting option.

Only 1 decimal allowed. Contact us on 0800 77 26 33 for more information.

Confirm Cancel

Add a note to your order line

Back to top

JYDPF4600LX45

  White - Gloss

ARL DPF4600LX White Gloss 1.52 X 45.72m

  • Durability 5.0 year(s)
  • Length 45.72 metre
  • Product number JYDPF4600LX45
  • Roll Length 45.72 metre
  • Surface Finish Gloss
  • Transparency Opaque
  • Width 152.4 cm
 

Add a note to your order line

NB – These notes are stored for your reference only –
these will not be seen by Spandex staff.

132 characters remaining

Confirm

 

£

0.00

Please select your slitting option.

Please select your slitting option.

Only 1 decimal allowed. Contact us on 0800 77 26 33 for more information.

Confirm Cancel

Add a note to your order line

Back to top
Filter these variations
text.skipToNavigation
 Back to top

You are about to switch to the  website.

By switching to the  website you will be automatically logged out.

Yes, I want to continue.No, I want to stay.

Near Roll Completion

You request a quantity which is near to 1 or more complete rolls. Do you wish to order full rolls (quantity: ) or keep the requested quantity?

Near Roll Completion

You request a quantity which is near to 1 or more complete rolls. Do you wish to order full rolls (quantity: ) or keep the requested quantity?

You cannot order online.

Unfortunately you are not allowed to order online. Please call our team for help on 0800 77 26 33.

Send a request to open a Spandex account and we will contact your shortly.

Timeout notification

Your login expired due to inactivity.
You will be logged out and redirected to the login page. Click OK to continue and log in again.

Why? This greatly reduces the chances that someone else will access your information if you forget to log out.

Ok

Loading ...