Arlon DPF 8003 Clear
DPF 8000 Clear is a 3-mil (75 micron) luster clear vinyl film with an aggressive permanent pressure-sensitive adhesive.
Designed for indoor and outdoor graphics, DPF 8000 Clear is made of an engineering-grade face stock with a polycoated lay-flat liner.
The special adhesive is designed to stick to “hard-to-stick” and low energy surfaces. The film is designed for applications on flat surfaces when processed and applied according to Arlon recommendations.
Printed durability is dependent on the ink system used.
*Please be aware that due to the stength of the adhesive, these rolls are slit by 10mm each side before sending out to avoid damaging print heads. We are able to not trim the edges but please request with the team on 0800 77 26 33. If purchasing a laminate to go in conjunction with the print media please state in slitting instructions.
|Interior or Exterior use||
Adhesive & Liner
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Type||High Tack|
|Minimal Temperature Resistance||-29 °C|
|Maximal Temperature Resistance||65 °C|
|Minimum Application temperature||16 °C|
|Maximum Application temperature||32 °C|
|Durability (range)||Up to 7 years|
|Product Type||Calendered Polymeric|