ImagePerfect™ Adhesive Remover Pro is a professional, ready-to-use and very powerful product for removing adhesive remains from a wide variety of surfaces.
Suitable surfaces include:
- Car bodies (e.g. short-term vehicle wraps)
- Windows and glass surfaces
- Plastic substrates
- Anodised aluminium
- PVC banners
Please refer to additional information for guidance.
|Interior or Exterior use||
|Shelf Life||1 year, 20°C / 50% humidity|
GUIDELINES: IP Adhesive Remover Pro is a ready-to-use product. Simply spray it directly onto the surface. Ensure even coverage and allow it to soak for a few minutes. Rub the adhesive off and then wipe the surface using a clean, dry, soft cloth. Repeat as necessary. If additional attention is required for particularly resiliant residue, the use of a high-pressure washing system will be useful.To minimise the possibility of staining, do not apply in direct sunlight or onto a hot surface. IP Adhesive Remover Pro does not contain hazardous materials and can be considered environmentally-friendly, although it should not be used below 10°C.
ATTENTION: It is possible that substrates made from polycarbonate and other plastics (e.g. car head lights and indicator lights), synthetic substrates such as acrylics, Plexiglas, Perspex and polystyrene, and also any varnished substrate, can be affected by the IP Adhesive Remover, particularly if the substrate in question is aged. In such cases, stress cracks may develop on the substrate. As such, we would recommend that all end-users test the IP Adhesive Remover Pro on a small (ideally hidden) area of the substrate prior to complete use, just to ensure its compatability.
PRECAUTIONS: Vapour may cause flash fires. Keep away from heat, sparks, flame and sources of static discharge. Avoid eye and skin contact. Wash thoroughly after handling. Avoid breathing vapours, mist, or spray. Use only with adequate ventilation. Close container after each use. Do not ingest. Keep out of reach of children. SUGGESTED FIRST AID: Eye Contact - Flush eyes with large amounts of water. If signs/symptoms persist, seek medical attention. Skin Contact - Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Seek medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Expose person to fresh air. If signs/symptoms develop, seek medical attention. If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Seek immediate medical attention.