Signmaking Tools & Accessories
ImagePerfect™ Seam Tack Tape
Adhesive Tape for PVC:
- Transparent Tape
- Double sided
- 300 micron
- Acrylic adhesive
ImagePerfect™ Soft Squeegee
IP soft squeegee - high quality felt squeegee that will not scratch the surface of digital prints or speciality vinyl. Ideal for flat of lightly curved surfaces, for low pressure applications.
Avery Dennison® Premium Surface Cleaner
Avery Dennison® Surface Cleaner is a high-performance cleaner that enables you to remove all kinds of residue in one single action, including dirt, wax, tectyl, light silicone, cock-pit sprays, and more.
A highly user-friendly cleaner, it can also be used for removing small adhesive residues from surfaces.
ImagePerfect™ Squeegees have been specially developed to enable efficient handling and application of self adhesive films in various applications.
The felt edge protects against damage to delicate and printed films.
The range includes the following products:
Basic Blue Squeegee (MMM1000) - pack of 10
Standard Red Squeegee (P23541C) - pack of 10
Felt edged IP Squeegee 70 x 100mm (OGX0120) - single item
Felt edged IP Squeegee 70 x 150mm (OGX0122) - single item
RollePro - Vinyl Application Roller
MS Roller Pro is a 45mm soft application roller that is ideal for the application of wallpapers and textiles.
The soft surface of the roller aids application as it applies even pressure across the roller and presses the media well into the textured surface of the wall.
Avery Dennison® Snitty Knife
Avery Dennison® Snitty is a mini-slitting tool, used for cutting self adhesive material.
Supplied complete with blade refill.
ImagePerfect™ EP-100 Manual Eyelet Press
Manual eyelet press and selection of tools and accessories:
- 8mm, 9.5mm, 12mm and 12.7mm eyelets and washers
- Silver and clear
Steinel® Car Wrapper Heat Gun HG2120E
Steinel HG 2120 E is a professional class heat gun particularly suitabled for car wrapping.
This 2200-W hot air tool is available in two models with a 2.2m cable or a 7.5m cable, it is also available as a 'Carwrappers Set' where it is bundled with the Steinel HL Temperature Scanner which can also be purchased separately. The ceramic heater's temperature can be infinitely varied over a range of 80 °C - 630 °C at the thumbwheel. Airflow can be controlled in 3 stages (150 – 500 l/min).
Steinel® HL Temperature Scanner measures the temperature at the workpiece surface while working on it with the hot air tool. An acoustic signal sounds as soon as heat either exceeds or falls below the ideal temperature. The display also shows whether workpiece surface is too hot or too cold. Red means "too hot", green means "ideal temperature" and blue means "too cold".
- 2200-watt brushless motor, rated for 750 hours of operation.
- Integrated thermal cut-out to prevent overheating.
- 3-stage blower, from 150 – 500 l/min.
- Simple temperature adjustment from 80 – 630 °C by thumbwheel, temperate display on the thumbwheel in in 9 stages.
- Ergonomic handle with soft inlay for working safely with one hand.
- Non-slip standing surface and hanger.
- Service-friendly: the heater can be replaced in next to no time, the power cord can be changed without opening the enclosure.
The following accessories are also available:
- Temperature Scanner
- Protective Case
- Flexible Stand
Avery Dennison® Squeegees
Pro Blue Squeegee: A blue nylon reinforced squeegee with a black felt edge that will not scratch or mar the surface of digital prints or specialty vinyl. The perfect tool for flat or lightly curved surfaces.
White 100% Felt Squeegee: A white felt squeegee designed for flat or lightly curved surfaces for medium and low pressure applications. Best used for highly contoured areas where the hard squeegees don’t conform. Should not be used for the entire application because it doesn’t allow for enough pressure on the film which usually results in bubbles that appear a day or so after the application.
Pro Flex Red Squeegee: A red, softer and more flexible squeegee with a felt edge that will not scratch or mar the surface of digital prints or specialty vinyl. Ideal for 3D applications, deep corrugations and curved applications like pillars and car bumpers.
Pro XL Blue Squeegee: The Avery Dennison® Squeegee Pro XL is the big brother of the Squeegee Pro. It is a 6" rigid squeegee versus standard 4", allowing for faster high quality applications on large and flat surfaces like buildings/buses.
Micro-Squeegee Set: The FleXtreme is a micro-squeegee that is specifically designed for vinyl graphics applications. The blue (harder) FleXtreme is designed to apply film at narrow curves and edges, to ensure seamless application. The red (softer) FleXtreme is an ideal tool to support film application in narrow, concave parts of a car.
- Particulary tough
- Protects from dirt
- Adds shiny finish
- Adds slight texture