ImagePerfect™ 2800-100 Gloss 3D Over-Laminate
3D Gloss Cast Laminate For Vehicle Wrapping
Learn more about ImagePerfect™ 2800-100 Gloss 3D Over-Laminate
ImagePerfect™ 2800-100 is a 3D, cast laminate with a gloss surface finish that has been specifically designed for use in conjunction with vehicle graphics and car wraps. It features a highly effective UV filter to ensure long term graphics durability.
The premium, polyester release liner allows for excellent layflat properties and superior levels of transparency.
To encourage long durability, it is essential that the substrate is thoroughly cleaned prior to application. Additionally, when the material has been applied over convex or concave surfaces and is thereby subject to deformation, it is imperative that post-heating is carried out, whereby the vinyl should be heated evenly over the surface to a temperature of at least 100 C (for best results, use an infrared thermometer for accuracy).
This laminate can be considered for use on IP 2507, IP 2508, IP 2517 and IP 2520PA.
|Interior or Exterior use||
|Minimal Temperature Resistance||-40.0 °C|
|Maximal Temperature Resistance||90.0 °C|
Adhesive & Liner
|Adhesive||Solvent acrylic based, permanent|
|Adhesive Composition||Solvent-based acrylic|
|Adhesive Strength||14.0 N/25mm|
|Material used as liner||One side siliconised clay coated Kraft, 150|
|Shelf Life||2 years (20°C / 55% relative humidity)|
|Durability (range)||Up to 7 years|
Please make sure the printed vinyl is completely dry before laminating with IP 2800-100.
Take care no tension will occur when laminating, especially at higher temperatures.
Before this product is applied, the surface should be perfectly cleaned with the highly accurate IP Surface Cleaner (MIP1000), using the match-component, lint-free, IP Surface Cleaning Cloths (MMS8373) to ensure that the surface is wiped dry and dust and grease is wiped off.
3-D applications should NOT be wet applied.
The overlaminate choice has a significant impact on conformability, ease of application and aesthetics. Pairing a high-performance film with a too-stiff overlaminate can cause installation problems or graphic failure (pop up). Look for overlaminates that provide high conformability and flexibility as well as UV, weathering and abrasion protection for the underlying graphic. Highly versatile products include IP 2800-100 gloss and IP2800-200 matt.
Like film IP 2507, IP 2507PA, IP 2508, IP 2520 and IP 2520PA overlaminate IP 2800-100 gloss (or IP2800-200 matt) uses new film technology that has virtually no memory once applied with ImagePerfect recommended application techniques.
IP 2800-100 3-D Overl.Gloss 137,2cmx50m
- Length50.0 meter
- Product numberIP280010050
- Surface FinishGloss
- Width137.2 cm