Printable White Flex
Learn more about ImagePerfect™ 2913
ImagePerfect™ 2913 is an extremely thin and flexible, white matt printable Flex material that has been specifically designed for inkjet printers. This product is printable with eco solvent, solvent and latex inks but is not suitable for application to nylon.
This supreme film offers superb encapsulation with the fabric, excellent printability and excellent washability.
Due to the polyester backing, contour cutting of small shapes is possible.
|Interior or Exterior use||Interior|
Adhesive & Liner
|Adhesive||Thermally activated, clear adhesive|
|Adhesive Type||Heat activated|
|Material used as liner||Polyester|
|Shelf Life||2 years, 20°C / 50% humidity|
|Curve Format||Flexible substrates|
Print the graphic with the right side facing up (do not reverse print).
Contour cut the image at reduced plotter speed.
After weeding, apply an application tape (we recommend clear IP PrintFlex Tape for heat transfer).
Place the graphic on the fabric and transfer using a heat press. We recommend 160°C for 15 seconds (cotton). Always use a Teflon sheet or a layer of silicone paper to prevent the graphic from sticking to the upper plate of the heat press. Be sure to perform a test when using application tapes not recommended by Spandex.
Remove the application tape while the material is still warm as it will peel off better before it has cooled off completely.
IP 2913 is only suitable for printing.
Washability up to 40°C (inside out) - do not tumble dry - and iron inside out.
Due to the numerous factors associated with the manufacturing and handling of the heat transfer film, the physical properties of the fabric as well as varying washing and cleaning conditions, product liability only extends to the unprinted material.