ImagePerfect™ 2830-100 WindowFilm Over-Laminate
Speciality PVC Overlaminate For Perforated Window Films
Learn more about ImagePerfect™ 2830-100 WindowFilm Over-Laminate
ImagePerfect™ 2830-100 is a special vinyl protective laminate uniquely suited to protect graphics printed on all ImagePerfect™ perforated window marking films. This special laminate option utilises a 2-component, humidity-resistant adhesive system.
When applying a window marking film, be sure to apply it approximately 6mm from the window border. Apply the laminate over the window film leaving a gap of 1mm from the window edge. This gives you an overlap of 5mm.
IP 2830-100 is not suitable for wet applications.
This laminate can be used on IP 2701, IP 2703 and IP 2706.
IMPORTANT: This special laminate is impervious to gas and moisture. Therefore the laminate and the print media must not be wet applied and the print media has to be particularly well dried before lamination.
|Interior or Exterior use||
Adhesive & Liner
|Adhesive||Acrylic based, permanent|
|Adhesive Composition||Water-based acrylic|
|Adhesive Strength||12.0 N/25mm|
|Material used as liner||Modified polyester, 36 microns|
|Minimal Temperature Resistance||-50.0 °C|
|Maximal Temperature Resistance||110.0 °C|
|Surface Type||Flat surfaces|
|Fire Rating||Self-extinguishing when adhered to steel|
|Shelf Life||2 years (20°C / 55% relative humidity)|
|Durability (range)||Up to 8 years|
IP 2830-100 PWMF Overlaminate 140cmx50m
Clear - Gloss
- Length50.0 meter
- Product numberIP283010050
- Surface FinishGloss
- Width140.0 cm