ImagePerfect™ 6902 is a thermally-printable, clear Flex material.
This extremely thin material offers excellent printability and washability. It has been specifically designed for printing on thermal-transfer printers and produces excellent results when printed on the Gerber Edge I & II and FX, but also on the Roland PC 12, 60 and 600.
IP 6902 can only be used on light coloured textiles; for dark coloured textiles we recommend the use of IP 6901.
Only use GCS & GCP cartridges for printing on this material. IP 6902 cannot be used on water repellent surfaces such as nylon.
If you want to use this material on coloured textiles, use GCS10 to make a white overprint (also applicable if a white contour is needed).
To protect the material from dust IP 6902 is wound print side in. Once the graphic has been transferred, it will show a high-gloss surface.
Washability up to 40°C (inside out) - do not tumble dry - and iron inside out.
Adhesive & Liner
|Adhesive||Clear heat activated adhesive|
|Adhesive Type||Heat activated|
|Material used as liner||White paper|
|Shelf Life||2 years, 20°C / 50% humidity|
|Minimum Application temperature||165 °C|
|Maximum Application temperature||175 °C|
Reverse print the graphic on the clear material using the 3M 220 profile (change print settings in Quickplot 123 to LIGHTER and reverse the print order of the colours).
After contour cutting the graphic and weeding the excess material, place the graphic on the fabric with the backing facing up (no application tape required). Press at 150°C - 160°C for 15 - 20 seconds.
After pressing, remove the backing paper when the material has cooled off to room temperature.