TexGraphics White Flex
ImagePerfect™ 2902 is a thin, white printable Flex material that has been specifically designed for inkjet printers and which offers excellent printability and washability.
Due to the polyester backing, contour cutting of small shapes is possible.
This product is printable with eco solvent, solvent and latex inks but is not suitable for application to nylon.
For applications to nylon we recommend the use of IP 2914.
|Interior or Exterior use||Interior|
|Shelf Life||2 years, 20°C / 50% humidity|
Adhesive & Liner
|Adhesive||Clear, heat activated adhesive|
|Adhesive Type||Heat activated|
|Material used as liner||Polyester|
|Maximal Temperature Resistance||40 °C|
Print the graphic with the right side facing up (do not reverse print).
Contour cut the image at reduced plotter speed.
After weeding, apply an application tape (we recommend clear IP PrintFlex Tape for heat transfer).
Place the graphic on the fabric and transfer using a heat press.
We recommend 150°C for about 12 - 15 seconds (cotton).
Always use a Teflon sheet or a layer of silicone paper to prevent the graphic from sticking to the upper plate of the heat press.
Be sure to perform a test when using application tapes not recommended by Spandex.
Remove the application tape while the material is still warm as it will peel off better before it has cooled off completely.
IP 2902 is only suitable for printing.
Washability up to 40°C (inside out) - do not tumble dry - and iron inside out.
Due to the numerous factors associated with the manufacturing and handling of the heat transfer film, the physical properties of the fabric, as well as varying washing and cleaning conditions, product liability only extends to the unprinted material.