GerberColor™ FX Finishing Foil Refills
Up to 5-year outdoor life, GerberColor foils for finishing effects
GerberColor FX™ Finishing Series Foil Refills offer a gloss finish for thermally printed graphics.
Abrasion Guard SPF (Sign Protection Formula) is specifically designed to improve the UV resistance of EDGE-printed graphics.
This clear, topcoat GerberColor Foil also protects graphics from moderate abrasion from contact or handling.
It has an expected performance life of five years (when printed by itself). When applied as a protective overprint on other GerberColor Foils, Abrasion Guard SPF will extend the life of the base color by up to 30%.
Matte Clear is designed to reduce the gloss level of printed graphics or cut vinyl. Graphics and vinyl that have been overprinted with Matte Finish will have their gloss level reduced by 60%. Its use does not affect or enhance the GerberColor printed image warranty.
For increased protection from chemical and abrasion impact, please refer to the various filmic laminates.
|Interior or Exterior use||
|Shelf Life||Store foils at 4°C to 32°C and 40% to 60% humidity.|
Recommended working environment is as follows:
- Operating temperature: 10°C to 35°C
-Recommended temperature for assured printing accuracy: 20°C to 26°C
- Operating humidity: 20% to 90% relative humidity, non-condensing (maximum range, actual range varies by material used)
SHELF LIFE AND STORAGE
Printed graphics should be applied within one year. GerberColor Foils, film and printed graphics (with or without pre-mask) should be kept in a clean area free from excessive moisture and direct sunlight. Store foils at 4°C to 32°C and 40% to 60% humidity. When not in use, cartridges should be kept in their package sleeves. Use a paper interleaf between printed materials that are stacked or rolled. Do not store printed graphics face to face.
Discounted prices can be obtained by assorting any foil colour or type and/or any full roll of vinyl.